Limitless Gear LOPC Active Shooter Kit With Level III+ SPARTAN™ AR550 Premium Steel Body Armor Shooters Cut Plates NIJ 0101.06 CERTIFIED
LIMITLESS GEAR – RIFLE ARMOR DEFENDER SYSTEMS (RADS)
The Limitless Gear - Chase Tactical LOPC Level III+ Active Shooter Kit with SPARTAN™ AR550 Premium Steel Body Armor Shooters Cut Plates NIJ 0101.06 CERTIFIED is a ideal cost-effective protection solution to prepare and be able to respond to a High Threat Active Shooter Situation with confidence. This kit provides protection against both hand gun and rifle rounds. Be Prepared – Get Armored Now. Plates are NIJ 0101.06 Certified
Chase Tactical LOPC Plate Carrier x 1 (Choose Color)
Two SPARTAN™ LEVEL III+ AR550 Premium Steel Body Armor Shooters Cut Plates NIJ 0101.06 CERTIFIED 10x12 Multi Hit Single Curve Full Coat Frag Mitigation
Original Tough Hook Armor Hanger in Black Included (Free)
Free Shipping on Kit
The Chase Tactical LOPC Plate Carrier is a light weight plate carrier that works with any SAPI Medium 9.5X12.5 or 10x12 set of hard armor plates and soft armor backers. The LOPC has built in padded and fully adjustable shoulder straps. The tops of the shoulder straps have both nylon webbing and elastic webbing for mounting and routing tourniquets, hydration tubes, radio antennas, handsets, comm wires, V Lites, and strobe lights. The front incorporates a large matching Velcro loop area for placards and 2 vertical clips which will accept a variety of pre-configured weapon-specific pouch panels. The LOPC comes standard with a removable MOLLE clip placard held in place by 2 vertical clips. Spacer mesh is used on the inside of the LOPC for increased breathability and comfort. The cummerbund is made of lightweight breathable mesh with MOLLE webbing on the exterior and interior. Strong drag handle that Velcro’s down and out of the way when not in use.
Removable cummerbund with Mil-Spec Velcro
Lightweight breathable cummerbund with MOLLE webbing on the exterior and interior.
Vertical Clips for rapid add/removal of auxiliary chest worn equipment
Comes standard with a removable MOLLE clip placard
Interchangeable cummerbund system
Fully adjustable & padded shoulder straps
Spacer mesh for comfort & breathability
Strong drag handle that Velcro’s down
Large Velcro area for placards
Made with Mil-Spec IR Treated 500D Cordura
Mil-Spec IR Treated Murdock Webbing
All our Fabrics, Webbing, and Plastic Hardware are treated at source to deliver the lowest I.R. Signature possible.
SPARTAN™ AR550 Premium Steel Body Armor Plates Level III+ 10x12 SHOOTERS CUT NIJ CERTIFIED
AR550 Body Armor has a 10% increase in ballistic core hardness, our level III+ AR550 armor defeats higher velocity threats such as XM193, M855, and M80! We’re special rifle threat validated!
Our AR550 body armor is NIJ level III rated but has undergone special threat testing to achieve a level III+ rating, NIJ Certification applies to AR550 Shooters Cut Single Curve Full Coat armor plates. These are the plate were selling.
Our AR550 armor hits the “sweet spot” in the Brinnell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found our ballistically rated variant of AR550 that we use is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming.
Our AR550 Level III+ armor has our GEN2 lower cut radius. With a 10% increase in core hardness, this ballistic grade steel perfectly hits the “sweet spot”. It’s much harder than AR500, but not too hard to cause severe stress while forming.
This AR550 armor is made to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109 and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly!
Configuration: This armor comes as a pair, meaning you will receive both front and back plates
Plate Weight (per plate):
- 10x12 AR550 Shooters Cut: Full Coat 8lbs 10oz.
- NIJ 0101.06 Certified Model
- NIJ CPL LISTED
- Level III+
- 10"W x 12"L x .25"W
- Weight 8.10 LBS EACH PLATE
- Single Curve
- Shooter Cut
- Multi Hit
- Full Coat Frag Mitigation Coating
- 5 Year Warranty
- SS109/M855 3148 fps 6 shots
- .223 REM 60gr. Partition 2762 fps 6 shots
- M43 MSC 2407 fps 6 shots
- M67 Led Core 2375 fps 6 shoots
Original Tough Hook Armor Hanger - Black
Due to the nature of this product, All Sales are Final. Warranty/MFG Defects excluded. No shipments to CT.
PLEASE NOTE THAT BY PLACING AN ORDER YOU AGREE TO COMPLY WITH ALL LOCAL, STATE, AND FEDERAL LAWS REGARDING BODY ARMOR.
**United States law restricts possession of body armor for convicted felons. Many U.S. states also have penalties for possession or use of body armor by felons. Limitless Gear LLC., is also unable to ship any body armor plates, Shields, etc. to the state of Connecticut. By purchasing body armor from Limitless Gear LLC., you are certifying that you have not been convicted of any crime that would restrict you from being able to purchase or possess body armor under any Federal, Local or State laws. Furthermore, you are acknowledging that you do not intend to use the body armor for any criminal purpose. Limitless Gear LLC., does reserve the right to refuse to sell body armor to any person.